{"title":"New","description":"","products":[{"product_id":"anlegetemperatur-rohranlegemessumformer-thermasgard-altm1-wmodbus-ip65-w-modbus-kabelverschraubung-1101-12bf-0000-000","title":"THERMASGARD® ALTM1-wModbus","description":"Calibratable contact temperature measuring transducer (compact version) THERMASGARD® ALTM 1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, pipe feeder, incl. clamping strap, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus). With device variant wModbus, the W-Modbus (Wireless)\u003cbr\u003ereplaces the RTU cable, the BMS connection is radio-based via a W-Modbus gateway.\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on pipes, pipes (e.g. cold and hot water) or on heating pipes for heating control. \u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254847603019,"sku":"1101-12BF-0000-000","price":232.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-1-wModbus__tyr3_maxi-mL_4c.png?v=1769760065"},{"product_id":"anlegetemperatur-rohranlegemessumformer-thermasgard-altm1-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-12bf-4000-000","title":"THERMASGARD® ALTM1-wModbus LCD","description":"Calibratable contact temperature measuring transducer (compact version) THERMASGARD® ALTM 1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, pipe feeder, incl. clamping strap, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus). With device variant wModbus, the W-Modbus (Wireless)\u003cbr\u003ereplaces the RTU cable, the BMS connection is radio-based via a W-Modbus gateway.\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on pipes, pipes (e.g. cold and hot water) or on heating pipes for heating control. \u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254848422219,"sku":"1101-12BF-4000-000","price":293.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-1-wModbus-Display__tyr3_maxi-mL_4c.png?v=1769760126"},{"product_id":"aussen-feuchtraum-temperaturmessumformer-thermasgard-atm2-wmodbus-ip65-w-modbus-kabelverschraubung-1101-12cf-0000-000","title":"THERMASGARD® ATM2-wModbus","description":"Calibratable outdoor temperature measuring transducer THERMASGARD® ATM 2 - Modbus - T3, with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The surface-mounted sensor is used to measure the temperature in gaseous media. It is used outdoors or in damp rooms, in cold stores and greenhouses, in industry and in agriculture. Installation on external walls is preferably on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sun and ball impact protection (accessories) must be used.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254860153163,"sku":"1101-12CF-0000-000","price":227.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATM-2-wModbus__tyr3_maxi-mL_4c.png?v=1769650408"},{"product_id":"aussen-feuchtraum-temperaturmessumformer-thermasgard-atm2-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-12cf-4000-000","title":"THERMASGARD® ATM2-wModbus LCD","description":"Calibratable outdoor temperature measuring transducer THERMASGARD® ATM 2 - Modbus - T3, with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The surface-mounted sensor is used to measure the temperature in gaseous media. It is used outdoors or in damp rooms, in cold stores and greenhouses, in industry and in agriculture. Installation on external walls is preferably on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sun and ball impact protection (accessories) must be used.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254860742987,"sku":"1101-12CF-4000-000","price":287.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATM-2-wModbus-Display__tyr3_maxi-mL_4c.png?v=1769650449"},{"product_id":"anlegetemperatur-rohranlegemessumformer-thermasgard-altm2-wmodbus-ip65-w-modbus-kabelverschraubung-1101-62bf-0210-000","title":"THERMASGARD® ALTM2-wModbus","description":"Calibratable contact temperature measuring transducer (remote version) THERMASGARD® ALTM 2 - Modbus - T3 ALTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with pipe feeder, incl. clamping strap, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on pipes, tubes (e.g. cold and hot water) or on heating pipes for heating control.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254872539467,"sku":"1101-62BF-0210-000","price":240.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-2-wModbus__tyr3_maxi-mL_4c.png?v=1769760301"},{"product_id":"anlegetemperatur-rohranlegemessumformer-thermasgard-altm2-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-62bf-4210-000","title":"THERMASGARD® ALTM2-wModbus LCD","description":"Calibratable contact temperature measuring transducer (remote version) THERMASGARD® ALTM 2 - Modbus - T3 ALTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with pipe feeder, incl. clamping strap, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pipe contact sensor is used to measure the temperature on pipes, tubes (e.g. cold and hot water) or on heating pipes for heating control.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254872998219,"sku":"1101-62BF-4210-000","price":300.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-2-wModbus-Display__tyr3_maxi-mL_4c.png?v=1769760339"},{"product_id":"huelsenfuehler-mit-temperaturmessumformer-thermasgard-hftm-wmodbus-ip65-w-modbus-kabelverschraubung-1101-62af-0210-000","title":"THERMASGARD® HFTM-wModbus","description":"Calibratable sleeve temperature measuring transducer THERMASGARD® HFTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve, optionally with\/without display, measures temperature (-50...+150 °C).  International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe sleeve sensor is used to measure the temperature in liquid and gaseous media.  It is used as a duct sensor or as an immersion and screw-in sensor in liquids by means of installation in immersion sleeve THE (accessory).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254910484811,"sku":"1101-62AF-0210-000","price":232.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HFTM-wModbus__tyr3_maxi-mL_4c.png?v=1769678776"},{"product_id":"huelsenfuehler-mit-temperaturmessumformer-thermasgard-hftm-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-62af-4210-000","title":"THERMASGARD® HFTM-wModbus LCD","description":"Calibratable sleeve temperature measuring transducer THERMASGARD® HFTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve, optionally with\/without display, measures temperature (-50...+150 °C).  International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe sleeve sensor is used to measure the temperature in liquid and gaseous media.  It is used as a duct sensor or as an immersion and screw-in sensor in liquids by means of installation in immersion sleeve THE (accessory).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254911828299,"sku":"1101-62AF-4210-000","price":291.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HFTM-wModbus-Display__tyr3_maxi-mL_4c.png?v=1769678814"},{"product_id":"raumpendel-temperaturmessumformer-thermasgard-rptm1-wmodbus-ip65-w-modbus-kabelverschraubung-1101-628f-0210-000","title":"THERMASGARD® RPTM1-wModbus","description":"Calibratable room pendulum temperature transmitter (with sleeve) THERMASGARD® RPTM1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve and plastic sintered filter (replaceable), optionally with\/without display, measures temperature (-50...+150 °C).  International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pendulum sensor is specially designed for recording the temperature in larger rooms or halls. The resistance thermometer (globe thermometer) achieves a very good, representative measurement result due to its positioning in the room. \u003cbr\u003eCalibratable room pendulum temperature transmitter (with globe) THERMASGARD® RPTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with black plastic globe, optionally with\/without display, measures temperature (-50...+150 °C). International unit system SI (default) can be switched to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254936699211,"sku":"1101-628F-0210-000","price":279.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPTM-1-wModbus__tyr3-K_maxi-mL_4c.png?v=1762920557"},{"product_id":"raumpendel-temperaturmessumformer-thermasgard-rptm1-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-628f-4210-000","title":"THERMASGARD® RPTM1-wModbus LCD","description":"Calibratable room pendulum temperature transmitter (with sleeve) THERMASGARD® RPTM1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve and plastic sintered filter (replaceable), optionally with\/without display, measures temperature (-50...+150 °C).  International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pendulum sensor is specially designed for recording the temperature in larger rooms or halls. The resistance thermometer (globe thermometer) achieves a very good, representative measurement result due to its positioning in the room. \u003cbr\u003eCalibratable room pendulum temperature transmitter (with globe) THERMASGARD® RPTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with black plastic globe, optionally with\/without display, measures temperature (-50...+150 °C). International unit system SI (default) can be switched to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254937256267,"sku":"1101-628F-4210-000","price":340.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPTM-1-wModbus-Display__tyr3-K_maxi-mL_4c.png?v=1762920593"},{"product_id":"raumpendel-temperaturmessumformer-thermasgard-rptm2-wmodbus-ip65-w-modbus-kabelverschraubung-1101-629f-0210-000","title":"THERMASGARD® RPTM2-wModbus","description":"Calibratable room pendulum temperature transmitter (with sleeve) THERMASGARD® RPTM1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve and plastic sintered filter (replaceable), optionally with\/without display, measures temperature (-50...+150 °C).  International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pendulum sensor is specially designed for recording the temperature in larger rooms or halls. The resistance thermometer (globe thermometer) achieves a very good, representative measurement result due to its positioning in the room. \u003cbr\u003eCalibratable room pendulum temperature transmitter (with globe) THERMASGARD® RPTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with black plastic globe, optionally with\/without display, measures temperature (-50...+150 °C). International unit system SI (default) can be switched to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254938992971,"sku":"1101-629F-0210-000","price":286.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPTM-2-wModbus__tyr3_maxi-mL_4c.png?v=1762920659"},{"product_id":"raumpendel-temperaturmessumformer-thermasgard-rptm2-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1101-629f-4210-000","title":"THERMASGARD® RPTM2-wModbus LCD","description":"Calibratable room pendulum temperature transmitter (with sleeve) THERMASGARD® RPTM1 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with stainless steel sleeve and plastic sintered filter (replaceable), optionally with\/without display, measures temperature (-50...+150 °C).  International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe pendulum sensor is specially designed for recording the temperature in larger rooms or halls. The resistance thermometer (globe thermometer) achieves a very good, representative measurement result due to its positioning in the room. \u003cbr\u003eCalibratable room pendulum temperature transmitter (with globe) THERMASGARD® RPTM 2 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, cable sensor with black plastic globe, optionally with\/without display, measures temperature (-50...+150 °C). International unit system SI (default) can be switched to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254939418955,"sku":"1101-629F-4210-000","price":347.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPTM-2-wModbus-Display__tyr3_maxi-mL_4c.png?v=1762920695"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-0-4m-ip65-w-modbus-kabelverschraubung-1101-326f-0080-000","title":"THERMASGARD® MWTM-wModbus 0.4M","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254974677323,"sku":"1101-326F-0080-000","price":308.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus__tyr3-rute-gerade_maxi-mL_4c.png?v=1769687794"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-3m-ip65-w-modbus-kabelverschraubung-1101-326f-0230-000","title":"THERMASGARD® MWTM-wModbus 3M","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254974808395,"sku":"1101-326F-0230-000","price":366.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus__tyr3_maxi-mL_4c.png?v=1769687821"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-6m-ip65-w-modbus-kabelverschraubung-1101-326f-0260-000","title":"THERMASGARD® MWTM-wModbus 6M","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254974939467,"sku":"1101-326F-0260-000","price":408.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus__tyr3_maxi-mL_4c_e47b4a4d-3f79-4c16-9899-4fd4e2e04aa9.png?v=1769687876"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-0-4m-lcd-ip65-w-modbus-kabelverschraubung-1101-326f-4080-000","title":"THERMASGARD® MWTM-wModbus 0.4M LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254975201611,"sku":"1101-326F-4080-000","price":367.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus-Display__tyr3-rute-gerade_maxi-mL_4c.png?v=1769687808"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-3m-lcd-ip65-w-modbus-kabelverschraubung-1101-326f-4230-000","title":"THERMASGARD® MWTM-wModbus 3M LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254975463755,"sku":"1101-326F-4230-000","price":426.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus-Display__tyr3_maxi-mL_4c.png?v=1769687860"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-6m-lcd-ip65-w-modbus-kabelverschraubung-1101-326f-4260-000","title":"THERMASGARD® MWTM-wModbus 6M LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254975627595,"sku":"1101-326F-4260-000","price":468.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus-Display__tyr3_maxi-mL_4c_2e47e0f0-d448-4e22-8ef3-ed3dd10bad78.png?v=1769687915"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-50mm-ip65-w-modbus-kabelverschraubung-1101-723f-0010-000","title":"THERMASGARD® TM65-wModbus 50MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255109157195,"sku":"1101-723F-0010-000","price":227.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c.png?v=1762945247"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-100mm-ip65-w-modbus-kabelverschraubung-1101-723f-0020-000","title":"THERMASGARD® TM65-wModbus 100MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255109484875,"sku":"1101-723F-0020-000","price":227.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_5a029df9-05b3-4676-a9c0-8c07e3d5fe3a.png?v=1762944726"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-150mm-ip65-w-modbus-kabelverschraubung-1101-723f-0030-000","title":"THERMASGARD® TM65-wModbus 150MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255109615947,"sku":"1101-723F-0030-000","price":227.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_c39a1926-38a7-41af-9866-dbfcf6953c3f.png?v=1762944802"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-200mm-ip65-w-modbus-kabelverschraubung-1101-723f-0040-000","title":"THERMASGARD® TM65-wModbus 200MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255111221579,"sku":"1101-723F-0040-000","price":227.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_6073dab6-4a68-417c-9b0d-2c6a73e0e69f.png?v=1762944876"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-250mm-ip65-w-modbus-kabelverschraubung-1101-723f-0050-000","title":"THERMASGARD® TM65-wModbus 250MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255111450955,"sku":"1101-723F-0050-000","price":228.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_faa82ff7-e47d-4895-85b9-cc974c4d685f.png?v=1762944950"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-300mm-ip65-w-modbus-kabelverschraubung-1101-723f-0060-000","title":"THERMASGARD® TM65-wModbus 300MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255111680331,"sku":"1101-723F-0060-000","price":229.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_20911333-7509-4d7a-b452-1c55a4c80db5.png?v=1762945024"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-350mm-ip65-w-modbus-kabelverschraubung-1101-723f-0070-000","title":"THERMASGARD® TM65-wModbus 350MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255111844171,"sku":"1101-723F-0070-000","price":230.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_902b55ab-ba3b-4960-9700-68c811b63759.png?v=1762945098"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-400mm-ip65-w-modbus-kabelverschraubung-1101-723f-0080-000","title":"THERMASGARD® TM65-wModbus 400MM","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255112040779,"sku":"1101-723F-0080-000","price":231.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus__tyr3_maxi-mL_4c_6e171ded-34ad-427e-8ea3-3be18a94c4fd.png?v=1762945173"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-50mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4010-000","title":"THERMASGARD® TM65-wModbus 50MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255112368459,"sku":"1101-723F-4010-000","price":286.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c.png?v=1762945295"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-100mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4020-000","title":"THERMASGARD® TM65-wModbus 100MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255112597835,"sku":"1101-723F-4020-000","price":287.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_9cb54d29-b8cf-45b4-b50a-b33b2289cc02.png?v=1762944773"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-150mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4030-000","title":"THERMASGARD® TM65-wModbus 150MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255113023819,"sku":"1101-723F-4030-000","price":287.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_e5c302de-9270-42e1-a8cb-e4a2b5889cc8.png?v=1762944848"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-200mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4040-000","title":"THERMASGARD® TM65-wModbus 200MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circulation systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255113318731,"sku":"1101-723F-4040-000","price":287.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_104d9707-2c1d-4a6d-870a-2da33f1aceb3.png?v=1762944922"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-250mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4050-000","title":"THERMASGARD® TM65-wModbus 250MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255113548107,"sku":"1101-723F-4050-000","price":288.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_67f41a25-5925-4723-a114-8782d519941f.png?v=1762944996"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-300mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4060-000","title":"THERMASGARD® TM65-wModbus 300MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255114072395,"sku":"1101-723F-4060-000","price":288.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_736608d0-2d12-4919-9c28-96e13b0a43a3.png?v=1762945072"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-350mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4070-000","title":"THERMASGARD® TM65-wModbus 350MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255114170699,"sku":"1101-723F-4070-000","price":290.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_995ae7c5-0acb-4408-a5c1-33e68a851d96.png?v=1762945146"},{"product_id":"tauch-einschraub-kanal-temperaturmessumformer-thermasgard-tm65-wmodbus-400mm-lcd-ip65-w-modbus-kabelverschraubung-1101-723f-4080-000","title":"THERMASGARD® TM65-wModbus 400MM LCD","description":"Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0) \u003cbr\u003e\u003cbr\u003eCalibratable temperature measuring transducer with sensor tube THERMASGARD® TM 65 - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, stainless steel protection tube (50 - 400 mm), optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003eThe duct sensor is used to measure the temperature in liquid or gaseous media.  The stainless steel immersion sleeves must be used for aggressive media. It is used in heating technology, ventilation and air conditioning ducts, in pipelines, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in mechanical and plant engineering and in the entire industrial sector.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51255114334539,"sku":"1101-723F-4080-000","price":291.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TM-65-wModbus-Display__tyr3_maxi-mL_4c_0966318d-4317-4327-adc5-0e8216190747.png?v=1762945220"},{"product_id":"aufputz-feuchte-und-temperaturfuehler-hygrasgard-aftf-wmodbus-ip65-w-modbus-1201-12cf-1000-000","title":"HYGRASGARD® AFTF-wModbus","description":"Calibratable outdoor humidity and temperature sensor HYGRASGARD® AFTF - Modbus - T3, with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display, with plastic sintered filter (replaceable), for precise measurement\u003cbr\u003e of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e The surface-mounted sensor is used in non-aggressive, dust-free environments. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results.\u003cbr\u003e The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display,\u003cbr\u003e two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255190061387,"sku":"1201-12CF-1000-000","price":275.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/AFTF-wModbus__tyr3-K_maxi-mL_4c.png?v=1769648277"},{"product_id":"aufputz-feuchte-und-temperaturfuehler-hygrasgard-aftf-wmodbus-lcd-ip65-w-modbus-1201-12cf-1400-000","title":"HYGRASGARD® AFTF-wModbus LCD","description":"Calibratable outdoor humidity and temperature sensor HYGRASGARD® AFTF - Modbus - T3, with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display, with plastic sintered filter (replaceable), for precise measurement\u003cbr\u003e of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e The surface-mounted sensor is used in non-aggressive, dust-free environments. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results.\u003cbr\u003e The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display,\u003cbr\u003e two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255190421835,"sku":"1201-12CF-1400-000","price":336.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/AFTF-wModbus-Display__tyr3-K_maxi-mL_4c.png?v=1769648320"},{"product_id":"taupunktwaechter-hygrasgard-tw-wmodbus-ip65-w-modbus-kabelverschraubung-1201-1281-f001-020","title":"HYGRASGARD® TW-wModbus","description":"Patented quality product\u003cbr\u003e (prodynamic transverse convection patent no. DE 10 2012 015 726.6)\u003cbr\u003e\u003cbr\u003e Calibratable dew point monitor HYGRASGARD® TW - Modbus - T3 (compact version incl. tensioning strap) or TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display. TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Condensation in particular is reliably determined thanks to its patented measuring method, prodynamic transverse convection (no conductivity measurement). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The contact sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255203135819,"sku":"1201-1281-F001-020","price":252.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-wModbus__tyr3_maxi-mL_4c.png?v=1762963021"},{"product_id":"taupunktwaechter-hygrasgard-tw-extern-wmodbus-ip65-w-modbus-kabelverschraubung-1201-1281-f001-030","title":"HYGRASGARD® TW-external-wModbus","description":"Patented quality product\u003cbr\u003e (prodynamic transverse convection patent no. DE 10 2012 015 726.6)\u003cbr\u003e\u003cbr\u003e Calibratable dew point monitor HYGRASGARD® TW - Modbus - T3 (compact version incl. tensioning strap) or TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display. TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Condensation in particular is reliably determined thanks to its patented measuring method, prodynamic transverse convection (no conductivity measurement). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The contact sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255203725643,"sku":"1201-1281-F001-030","price":272.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-wModbus-extern__tyr3_maxi-mL_4c.png?v=1762962796"},{"product_id":"taupunktwaechter-hygrasgard-tw-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1201-1281-f401-020","title":"HYGRASGARD® TW-wModbus LCD","description":"Patented quality product\u003cbr\u003e (prodynamic transverse convection patent no. DE 10 2012 015 726.6)\u003cbr\u003e\u003cbr\u003e Calibratable dew point monitor HYGRASGARD® TW - Modbus - T3 (compact version incl. tensioning strap) or TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display. TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Condensation in particular is reliably determined thanks to its patented measuring method, prodynamic transverse convection (no conductivity measurement). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The contact sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255203922251,"sku":"1201-1281-F401-020","price":313.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-wModbus-Display__tyr3_maxi-mL_4c.png?v=1762963010"},{"product_id":"taupunktwaechter-hygrasgard-tw-extern-wmodbus-lcd-ip65-w-modbus-kabelverschraubung-1201-1281-f401-030","title":"HYGRASGARD® TW-external-wModbus LCD","description":"Patented quality product\u003cbr\u003e (prodynamic transverse convection patent no. DE 10 2012 015 726.6)\u003cbr\u003e\u003cbr\u003e Calibratable dew point monitor HYGRASGARD® TW - Modbus - T3 (compact version incl. tensioning strap) or TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display. TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Condensation in particular is reliably determined thanks to its patented measuring method, prodynamic transverse convection (no conductivity measurement). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The contact sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255204348235,"sku":"1201-1281-F401-030","price":317.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-wModbus-extern-Display__tyr3_maxi-mL_4c.png?v=1762962785"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-wmodbus-ip65-w-modbus-1201-624f-1000-000","title":"HYGRASGARD® RPFTF-wModbus","description":"Calibratable room pendulum humidity and temperature sensor HYGRASGARD® RPFTF - Modbus - T3 (± 2.0 %) or RPFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, cable sensor with stainless steel pendulum and plastic sintered filter (replaceable), for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) and for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The pendulum sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atmospheric pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255222337867,"sku":"1201-624F-1000-000","price":369.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-wModbus__tyr3-K_maxi-mL_4c.png?v=1762920487"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-20-wmodbus-ip65-w-modbus-1201-624f-1000-001","title":"HYGRASGARD® RPFTF-20-wModbus","description":"Calibratable room pendulum humidity and temperature sensor HYGRASGARD® RPFTF - Modbus - T3 (± 2.0 %) or RPFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, cable sensor with stainless steel pendulum and plastic sintered filter (replaceable), for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) and for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The pendulum sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atmospheric pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255222632779,"sku":"1201-624F-1000-001","price":468.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-wModbus__tyr3-K_maxi-mL_4c_8bb5e8a4-4446-42b2-a04b-b9403e3c6695.png?v=1762920336"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-wmodbus-lcd-ip65-w-modbus-1201-624f-1400-000","title":"HYGRASGARD® RPFTF-wModbus LCD","description":"Calibratable room pendulum humidity and temperature sensor HYGRASGARD® RPFTF - Modbus - T3 (± 2.0 %) or RPFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, cable sensor with stainless steel pendulum and plastic sintered filter (replaceable), for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) and for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The pendulum sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atmospheric pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255222829387,"sku":"1201-624F-1400-000","price":463.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-wModbus-Display__tyr3-K_maxi-mL_4c.png?v=1762920470"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-20-wmodbus-lcd-ip65-w-modbus-1201-624f-1400-001","title":"HYGRASGARD® RPFTF-20-wModbus LCD","description":"Calibratable room pendulum humidity and temperature sensor HYGRASGARD® RPFTF - Modbus - T3 (± 2.0 %) or RPFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, cable sensor with stainless steel pendulum and plastic sintered filter (replaceable), for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) and for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The pendulum sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atmospheric pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255222927691,"sku":"1201-624F-1400-001","price":529.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-wModbus-Display__tyr3-K_maxi-mL_4c_c437158d-9f45-44e7-8b78-8d414abd0733.png?v=1762920318"},{"product_id":"vitrinen-feuchte-und-temperaturfuehler-hygrasgard-vftf-wmodbus-ip65-w-modbus-1201-625f-1000-000","title":"HYGRASGARD® VFTF-wModbus","description":"Calibratable showcase humidity and temperature sensor HYGRASGARD® VFTF - Modbus - T3, with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, cable sensor with flat stainless steel probe (pluggable), for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) and for determining various humidity measurement parameters. International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The display case sensor is used in non-aggressive, dust-free environments and is particularly suitable for installation in ceilings, walls, display cases or showcases. It is used in museums, galleries, cinemas, auditoriums and laboratories.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atmospheric pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003e Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255224303947,"sku":"1201-625F-1000-000","price":639.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/VFTF-wModbus__tyr3_maxi-mL_4c.png?v=1762967279"},{"product_id":"vitrinen-feuchte-und-temperaturfuehler-hygrasgard-vftf-wmodbus-lcd-ip65-w-modbus-1201-625f-1400-000","title":"HYGRASGARD® VFTF-wModbus LCD","description":"Calibratable showcase humidity and temperature sensor HYGRASGARD® VFTF - Modbus - T3, with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, cable sensor with flat stainless steel probe (pluggable), for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) and for determining various humidity measurement parameters. International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The display case sensor is used in non-aggressive, dust-free environments and is particularly suitable for installation in ceilings, walls, display cases or showcases. It is used in museums, galleries, cinemas, auditoriums and laboratories.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atmospheric pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003e Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255224598859,"sku":"1201-625F-1400-000","price":703.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/VFTF-wModbus-Display__tyr3_maxi-mL_4c.png?v=1762967253"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-wmodbus-w-modbus-ip65-1201-32cf-1000-029","title":"HYGRASGARD® KFTF-wModbus","description":"Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus - T3 (± 2.0 %) or KFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display, with plastic sintered filter (replaceable), incl. mounting flange, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Mounting flange included, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The duct sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003e Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255236886859,"sku":"1201-32CF-1000-029","price":273.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-wModbus__tyr3-PA6-K_maxi-mL_4c.png?v=1769679821"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-20-wmodbus-w-modbus-ip65-1201-32cf-1000-030","title":"HYGRASGARD® KFTF-20-wModbus","description":"Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus - T3 (± 2.0 %) or KFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display, with plastic sintered filter (replaceable), incl. mounting flange, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Mounting flange included, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The duct sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003e Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255237050699,"sku":"1201-32CF-1000-030","price":344.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-wModbus__tyr3-PA6-K_maxi-mL_4c_50474959-615b-450c-a613-68c1a86337db.png?v=1769679612"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-wmodbus-lcd-w-modbus-ip65-1201-32cf-1400-029","title":"HYGRASGARD® KFTF-wModbus LCD","description":"Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus - T3 (± 2.0 %) or KFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, with plastic sintered filter (replaceable), incl. mounting flange, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Mounting flange included, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The duct sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003e Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory, fine adjustment by a specialist is possible depending on the environment","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255237149003,"sku":"1201-32CF-1400-029","price":334.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-wModbus-Display__tyr3-PA6-K_maxi-mL_4c_355667d1-871c-40ec-ae10-7cfbe2aac5b2.png?v=1769679800"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-20-wmodbus-lcd-w-modbus-ip65-1201-32cf-1400-030","title":"HYGRASGARD® KFTF-20-wModbus LCD","description":"Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus - T3 (± 2.0 %) or KFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display, with plastic sintered filter (replaceable), incl. mounting flange, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Mounting flange included, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The duct sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003e Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255237345611,"sku":"1201-32CF-1400-030","price":497.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-wModbus-Display__tyr3-PA6-K_maxi-mL_4c.png?v=1769679591"}],"url":"https:\/\/www.spluss.com\/collections\/new.oembed?page=14","provider":"S+S Regeltechnik","version":"1.0","type":"link"}