{"title":"Duct temperature sensor, duct sensor \u0026 immersion temperature sensor active","description":"","products":[{"product_id":"anlegetemperaturfuehler-rohranlegemessumformer-thermasgard-altm1-a-0-10v-4-20ma-kabelverschraubung-1101-111e-0219-920","title":"THERMASGARD® ALTM1-A","description":"Calibratable contact temperature measuring transducer (compact version) THERMASGARD® ALTM 1 with eight switchable measuring ranges, continuous output, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, incl. clamping strap. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe contact sensor is used to measure the temperature on cables, pipes (e.g. cold and hot water) or on heating pipes for heating control. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254837313867,"sku":"1101-111E-0219-920","price":115.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-1-Modbus__tyr1_maxi-mL_4c.png?v=1769761249"},{"product_id":"anlegetemperaturfuehler-rohranlegemessumformer-thermasgard-altm1-a-lcd-0-10v-4-20ma-display-kabelverschraubung-1101-111e-2219-920","title":"THERMASGARD® ALTM1-A LCD","description":"Calibratable contact temperature measuring transducer (compact version) THERMASGARD® ALTM 1 with eight switchable measuring ranges, continuous output, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, incl. clamping strap. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe contact sensor is used to measure the temperature on cables, pipes (e.g. cold and hot water) or on heating pipes for heating control. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254838722891,"sku":"1101-111E-2219-920","price":172.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTM-1-Display__tyr1_maxi-mL_4c_0b891004-a879-4b7d-933d-d2171dcb0f3d.png?v=1769761270"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-a-0-4m-ip65-0-10v-4-20ma-kabelverschraubung-1101-313e-0089-900","title":"THERMASGARD® MWTM-A 0.4m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254940008779,"sku":"1101-313E-0089-900","price":189.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTF__tyr1-rute-gerade_maxi-mL_4c_0f0d4599-986f-4d42-befd-cdb4fa92d7df.png?v=1769686597"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-a-3m-ip65-0-10v-4-20ma-kabelverschraubung-1101-313e-0239-900","title":"THERMASGARD® MWTM-A 3m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254940107083,"sku":"1101-313E-0239-900","price":245.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM__tyr1_maxi-mL_4c.png?v=1769686638"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-a-6m-ip65-0-10v-4-20ma-kabelverschraubung-1101-313e-0269-900","title":"THERMASGARD® MWTM-A 6m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254940533067,"sku":"1101-313E-0269-900","price":300.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM__tyr1_maxi-mL_4c_b7168e64-b4fc-48c7-a047-4e6ffe2135dd.png?v=1769686680"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-a-0-4m-lcd-ip65-0-10v-4-20ma-kabelverschraubung-1101-313e-1089-900","title":"THERMASGARD® MWTM-A 0.4m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254940631371,"sku":"1101-313E-1089-900","price":244.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Display__tyr1-rute-gerade_maxi-mL_4c.png?v=1769686610"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-a-6m-lcd-ip65-0-10v-4-20ma-kabelverschraubung-1101-313e-1269-900","title":"THERMASGARD® MWTM-A 6m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254940991819,"sku":"1101-313E-1269-900","price":353.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Display__tyr1_maxi-mL_4c_99c8bb33-d088-49e2-81f5-23e6fdc16aba.png?v=1769686694"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-a-3m-lcd-ip65-0-10v-4-20ma-kabelverschraubung-1101-313e-2239-900","title":"THERMASGARD® MWTM-A 3m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254941155659,"sku":"1101-313E-2239-900","price":300.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Display__tyr1_maxi-mL_4c_b3ae847b-ad9d-43cb-b73e-2ed085730e41.png?v=1769686652"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-i-0-4m-ip65-4-20ma-kabelverschraubung-1101-3132-0089-900","title":"THERMASGARD® MWTM-I 0.4m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254941319499,"sku":"1101-3132-0089-900","price":189.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM__tyr1-rute-gerade_maxi-mL_4c.png?v=1769686726"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-i-3m-ip65-4-20ma-kabelverschraubung-1101-3132-0239-900","title":"THERMASGARD® MWTM-I 3m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254942466379,"sku":"1101-3132-0239-900","price":245.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM__tyr1_maxi-mL_4c_02947871-5367-4fde-80e9-4adc899c55e0.png?v=1769686789"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-sd-i-3m-ip65-4-20ma-kabelverschraubung-1101-3132-0239-90k","title":"THERMASGARD® MWTM-SD-I 3m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254942630219,"sku":"1101-3132-0239-90K","price":177.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-SD__tyr01_maxi-mL_4c.png?v=1769686916"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-i-6m-ip65-4-20ma-kabelverschraubung-1101-3132-0269-900","title":"THERMASGARD® MWTM-I 6m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254942794059,"sku":"1101-3132-0269-900","price":300.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM__tyr1_maxi-mL_4c_81536d42-3ee0-410a-9929-22dad13cf499.png?v=1769686854"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-sd-i-6m-ip65-4-20ma-kabelverschraubung-1101-3132-0269-90k","title":"THERMASGARD® MWTM-SD-I 6m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254943220043,"sku":"1101-3132-0269-90K","price":188.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-SD__tyr01_maxi-mL_4c_9c718dd7-3452-45aa-8f49-421e809309a9.png?v=1769686944"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-i-0-4m-lcd-ip65-4-20ma-display-kabelverschraubung-1101-3132-1089-900","title":"THERMASGARD® MWTM-I 0.4m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254944104779,"sku":"1101-3132-1089-900","price":244.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Display__tyr1-rute-gerade_maxi-mL_4c_91b78624-645d-4626-8dd0-6da0b664736f.png?v=1769686755"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-i-3m-lcd-ip65-4-20ma-display-kabelverschraubung-1101-3132-1239-900","title":"THERMASGARD® MWTM-I 3m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254950035787,"sku":"1101-3132-1239-900","price":300.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Display__tyr1_maxi-mL_4c_4b167c6f-f13b-477c-ba72-cdf3aafbc26b.png?v=1769686820"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-i-6m-lcd-ip65-4-20ma-display-kabelverschraubung-1101-3132-2269-900","title":"THERMASGARD® MWTM-I 6m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254950396235,"sku":"1101-3132-2269-900","price":353.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Display__tyr1_maxi-mL_4c_e1619f14-d29b-4472-85a2-f06f86ff3734.png?v=1769686884"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-u-0-4m-ip65-0-10v-display-kabelverschraubung-1101-3131-0089-900","title":"THERMASGARD® MWTM-U 0.4m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254950986059,"sku":"1101-3131-0089-900","price":189.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM__tyr1-rute-gerade_maxi-mL_4c_92e6c169-d7b0-462b-992b-58f9e530e602.png?v=1769687030"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-u-3m-ip65-0-10v-kabelverschraubung-1101-3131-0239-900","title":"THERMASGARD® MWTM-U 3m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254955180363,"sku":"1101-3131-0239-900","price":245.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM__tyr1_maxi-mL_4c_fab5edf8-c215-486c-949f-263c3f4e44f7.png?v=1769687093"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-sd-u-3m-ip65-0-10v-kabelverschraubung-1101-3131-0239-90k","title":"THERMASGARD® MWTM-SD-U 3m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254960292171,"sku":"1101-3131-0239-90K","price":177.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-SD__tyr01_maxi-mL_4c_896f3f42-559d-4253-b0d5-27b6a70d8e7c.png?v=1769686970"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-u-6m-ip65-0-10v-kabelverschraubung-1101-3131-0269-900","title":"THERMASGARD® MWTM-U 6m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254962585931,"sku":"1101-3131-0269-900","price":300.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM__tyr1_maxi-mL_4c_c23a99f4-f85e-4fae-bb24-6e460f7319ff.png?v=1769687157"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-sd-u-6m-ip65-0-10v-kabelverschraubung-1101-3131-0269-90k","title":"THERMASGARD® MWTM-SD-U 6m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254962880843,"sku":"1101-3131-0269-90K","price":188.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-SD__tyr01_maxi-mL_4c_a5d95f77-3dd3-451f-8b8f-1dd7a7f749f6.png?v=1769686997"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-u-0-4m-lcd-ip65-0-10v-display-kabelverschraubung-1101-3131-1089-900","title":"THERMASGARD® MWTM-U 0.4m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254963306827,"sku":"1101-3131-1089-900","price":244.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Display__tyr1-rute-gerade_maxi-mL_4c_5b72d54a-5a2b-4a56-9310-9d58be1dac69.png?v=1769687059"},{"product_id":"mittelwerttemperaturmessumformer-rutenfuehler-thermasgard-mwtm-u-6m-lcd-ip65-0-10v-display-kabelverschraubung-1101-3131-1269-900","title":"THERMASGARD® MWTM-U 6m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, flexible, fully active sensor rod and protection tube made of copper with plastic coating (robust design), housing made of impact-resistant plastic, housing cover with quick-locking screws. \u003cbr\u003e\u003cbr\u003eThe sensor is used to detect the average temperature (mean value) in gaseous media, e.g. as a duct temperature sensor in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it detects the applied temperature evenly). The rod sensor is available in lengths of 0.4...20 m and is supplied with a mounting flange as standard. Mounting clamps MK-05-M (accessory) are available for professional mounting of the rod. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254964453707,"sku":"1101-3131-1269-900","price":353.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Display__tyr1_maxi-mL_4c_90bf0652-8b6a-4cf9-8255-9a01bfcfa99e.png?v=1769687188"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-ecatp-0-4m-ip54-ethercat-p-kabelverschraubung-2001-4211-9100-001","title":"THERMASGARD® MWTM-ECATP 0.4m","description":"Networkable mean value temperature measuring transducer THERMASGARD® MWTM - EtherCATP with M8 plug connector (EtherCATP-coded), Bluetooth-capable, in impact-resistant plastic housing with quick-locking screws, optionally with\/without display and bar graph, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange.\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it evenly measures the temperature present). Mounting clamps MK-05-M (accessories) are available for professional installation of the rod. The sensor is calibrated at the factory. \u003cbr\u003e\u003cbr\u003eEtherCAT P-capable measuring transducer for industrial requirements with maximum reliability: with simple integration into the PLC level via the ESI configuration file of the device, with diagnostic options (such as communication error counter), extended setting options, retrievable historical data (min\/max) and maintenance interval determination of the sensor. Optionally with large illuminated display (three lines, individually programmable in the 7-segment and dot-matrix area) and bar graph (seven digits, LEDs freely configurable) for graphical representation, e.g. as a traffic light display.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254965109067,"sku":"2001-4211-9100-001","price":424.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-ECATP__tyr2-MF-rute-04m__maxi-mL_4c.png?v=1769687211"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-ecatp-3-0m-ip54-ethercat-p-kabelverschraubung-2001-4211-9100-011","title":"THERMASGARD® MWTM-ECATP 3.0m","description":"Networkable mean value temperature measuring transducer THERMASGARD® MWTM - EtherCATP with M8 plug connector (EtherCATP-coded), Bluetooth-capable, in impact-resistant plastic housing with quick-locking screws, optionally with\/without display and bar graph, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange.\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it evenly measures the temperature present). Mounting clamps MK-05-M (accessories) are available for professional installation of the rod. The sensor is calibrated at the factory. \u003cbr\u003e\u003cbr\u003eEtherCAT P-capable measuring transducer for industrial requirements with maximum reliability: with simple integration into the PLC level via the ESI configuration file of the device, with diagnostic options (such as communication error counter), extended setting options, retrievable historical data (min\/max) and maintenance interval determination of the sensor. Optionally with large illuminated display (three lines, individually programmable in the 7-segment and dot-matrix area) and bar graph (seven digits, LEDs freely configurable) for graphical representation, e.g. as a traffic light display.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254965469515,"sku":"2001-4211-9100-011","price":462.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-ECATP__tyr2-MF-rute-3m-6m__maxi-mL_4c.png?v=1769687274"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-ecatp-6-0m-ip54-ethercat-p-kabelverschraubung-2001-4211-9100-021","title":"THERMASGARD® MWTM-ECATP 6.0m","description":"Networkable mean value temperature measuring transducer THERMASGARD® MWTM - EtherCATP with M8 plug connector (EtherCATP-coded), Bluetooth-capable, in impact-resistant plastic housing with quick-locking screws, optionally with\/without display and bar graph, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange.\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it evenly measures the temperature present). Mounting clamps MK-05-M (accessories) are available for professional installation of the rod. The sensor is calibrated at the factory. \u003cbr\u003e\u003cbr\u003eEtherCAT P-capable measuring transducer for industrial requirements with maximum reliability: with simple integration into the PLC level via the ESI configuration file of the device, with diagnostic options (such as communication error counter), extended setting options, retrievable historical data (min\/max) and maintenance interval determination of the sensor. Optionally with large illuminated display (three lines, individually programmable in the 7-segment and dot-matrix area) and bargraph (seven digits, LEDs freely configurable) for graphical representation, e.g. as a traffic light display.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254965731659,"sku":"2001-4211-9100-021","price":510.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-ECATP__tyr2-MF-rute-3m-6m__maxi-mL_4c_2df78faa-bb58-443a-aa30-937ca50d821b.png?v=1769687340"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-ecatp-0-4m-lcd-ip54-ethercat-p-display-kabelverschraubung-2001-4212-9100-001","title":"THERMASGARD® MWTM-ECATP 0.4m LCD","description":"Networkable mean value temperature measuring transducer THERMASGARD® MWTM - EtherCATP with M8 plug connector (EtherCATP-coded), Bluetooth-capable, in impact-resistant plastic housing with quick-locking screws, optionally with\/without display and bar graph, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange.\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it evenly measures the temperature present). Mounting clamps MK-05-M (accessories) are available for professional installation of the rod. The sensor is calibrated at the factory. \u003cbr\u003e\u003cbr\u003eEtherCAT P-capable measuring transducer for industrial requirements with maximum reliability: with simple integration into the PLC level via the ESI configuration file of the device, with diagnostic options (such as communication error counter), extended setting options, retrievable historical data (min\/max) and maintenance interval determination of the sensor. Optionally with large illuminated display (three lines, individually programmable in the 7-segment and dot-matrix area) and bargraph (seven digits, LEDs freely configurable) for graphical representation, e.g. as a traffic light display.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254965895499,"sku":"2001-4212-9100-001","price":475.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-ECATP-LCD__tyr2-MF-rute-04m__maxi-mL_4c.png?v=1769687250"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-ecatp-3-0m-lcd-ip54-ethercat-p-display-kabelverschraubung-2001-4212-9100-011","title":"THERMASGARD® MWTM-ECATP 3.0m LCD","description":"Networkable mean value temperature measuring transducer THERMASGARD® MWTM - EtherCATP with M8 plug connector (EtherCATP-coded), Bluetooth-capable, in impact-resistant plastic housing with quick-locking screws, optionally with\/without display and bar graph, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange.\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it evenly measures the temperature present). Mounting clamps MK-05-M (accessories) are available for professional installation of the rod. The sensor is calibrated at the factory. \u003cbr\u003e\u003cbr\u003eEtherCAT P-capable measuring transducer for industrial requirements with maximum reliability: with simple integration into the PLC level via the ESI configuration file of the device, with diagnostic options (such as communication error counter), extended setting options, retrievable historical data (min\/max) and maintenance interval determination of the sensor. Optionally with large illuminated display (three lines, individually programmable in the 7-segment and dot-matrix area) and bargraph (seven digits, LEDs freely configurable) for graphical representation, e.g. as a traffic light display.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254967664971,"sku":"2001-4212-9100-011","price":513.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-ECATP-LCD__tyr2-MF-rute-3m-6m__maxi-mL_4c.png?v=1769687315"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-ecatp-6-0m-lcd-ip54-ethercat-p-display-kabelverschraubung-2001-4212-9100-021","title":"THERMASGARD® MWTM-ECATP 6.0m LCD","description":"Networkable mean value temperature measuring transducer THERMASGARD® MWTM - EtherCATP with M8 plug connector (EtherCATP-coded), Bluetooth-capable, in impact-resistant plastic housing with quick-locking screws, optionally with\/without display and bar graph, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange.\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it evenly measures the temperature present). Mounting clamps MK-05-M (accessories) are available for professional installation of the rod. The sensor is calibrated at the factory. \u003cbr\u003e\u003cbr\u003eEtherCAT P-capable measuring transducer for industrial requirements with maximum reliability: with simple integration into the PLC level via the ESI configuration file of the device, with diagnostic options (such as communication error counter), extended setting options, retrievable historical data (min\/max) and maintenance interval determination of the sensor. Optionally with large illuminated display (three lines, individually programmable in the 7-segment and dot-matrix area) and bargraph (seven digits, LEDs freely configurable) for graphical representation, e.g. as a traffic light display.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254968058187,"sku":"2001-4212-9100-021","price":561.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-ECATP-LCD__tyr2-MF-rute-3m-6m__maxi-mL_4c_d7189512-51ae-44c5-90fe-869e06b1205b.png?v=1769687380"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-sd-3-0m-ip65-modbus-rtu-kabelverschraubung-1101-3286-0230-000","title":"THERMASGARD® MWTM-Modbus-SD 3.0m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (3.0 m\/ 6.0 m, fully active) in protective tube made of reinforced thermoplastic hose and anti-kink spring, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (laid in a meandering pattern, it measures the temperature evenly). MK-05-M mounting brackets (accessories) are available for professional installation of the rod. Modbus sensor SD with RS485 Modbus interface (not electrically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254970319179,"sku":"1101-3286-0230-000","price":217.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus__tyr1-Y_maxi-mL_4c_8f49afa8-fdfe-4b8b-b923-213646fbe563.png?v=1769687521"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-sd-6-0m-ip65-modbus-rtu-kabelverschraubung-1101-3286-0260-000","title":"THERMASGARD® MWTM-Modbus-SD 6.0m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (3.0 m\/ 6.0 m, fully active) in protective tube made of reinforced thermoplastic hose and anti-kink spring, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (laid in a meandering pattern, it measures the temperature evenly). Mounting brackets MK-05-M (accessories) are available for professional installation of the rod. Modbus sensor SD with RS485 Modbus interface (not electrically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254970712395,"sku":"1101-3286-0260-000","price":269.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus__tyr1-Y_maxi-mL_4c_5bcb1079-12aa-4696-ab94-6ef123be7d9e.png?v=1769687565"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-sd-3-0m-lcd-ip65-modbus-rtu-kabelverschraubung-1101-3286-2230-000","title":"THERMASGARD® MWTM-Modbus-SD 3.0m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (3.0 m\/ 6.0 m, fully active) in protective tube made of reinforced thermoplastic hose and anti-kink spring, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or over a defined length (laid in a meandering pattern, it measures the temperature evenly). MK-05-M mounting clips (accessories) are available for professional installation of the rod. Modbus sensor SD with RS485 Modbus interface (not galvanically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). Sensor breakage or sensor short circuit are detected as faults by means of self-diagnostics. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254971072843,"sku":"1101-3286-2230-000","price":261.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus-Display__tyr1-Y_maxi-mL_4c_c94cd7f2-bbf5-4880-ad6b-a6e042b78d68.png?v=1769687552"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-sd-6-0m-lcd-ip65-modbus-rtu-kabelverschraubung-1101-3286-2260-000","title":"THERMASGARD® MWTM-Modbus-SD 6.0m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus-SD, with Modbus connection (Y adapter), in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (3.0 m\/ 6.0 m, fully active) in protective tube made of reinforced thermoplastic hose and anti-kink spring, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or over a defined length (laid in a meandering pattern, it measures the temperature evenly). MK-05-M mounting brackets (accessories) are available for professional installation of the rod. Modbus sensor SD with RS485 Modbus interface (not electrically isolated), switchable bus terminating resistor, DIP switch for setting in de-energized state, internal LEDs for telegram status display (illuminated, individually programmable). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254971400523,"sku":"1101-3286-2260-000","price":314.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus-Display__tyr1-Y_maxi-mL_4c_a6018caf-abef-4643-8b9f-dc83480e86f8.png?v=1769687595"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus_t3-0-4m-ip65-modbus-rtu-kabelverschraubung-1101-3266-0080-000","title":"THERMASGARD® MWTM-Modbus_T3 0.4m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254971662667,"sku":"1101-3266-0080-000","price":265.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus__tyr3-rute-gerade_maxi-mL_4c.png?v=1769687782"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-t3-3m-ip65-modbus-rtu-kabelverschraubung-1101-3266-0230-000","title":"THERMASGARD® MWTM-Modbus-T3 3m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254972186955,"sku":"1101-3266-0230-000","price":323.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus__tyr3_maxi-mL_4c.png?v=1769687658"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-t3-6m-ip65-modbus-rtu-kabelverschraubung-1101-3266-0260-000","title":"THERMASGARD® MWTM-Modbus-T3 6m","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254972711243,"sku":"1101-3266-0260-000","price":365.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus__tyr3_maxi-mL_4c_7dd00bc6-1775-47e4-b476-4d64e47aa858.png?v=1769687722"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-t3-0-4m-lcd-ip65-modbus-rtu-display-kabelverschraubung-1101-3266-4080-000","title":"THERMASGARD® MWTM-Modbus-T3 0.4m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254973464907,"sku":"1101-3266-4080-000","price":324.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus-Display__tyr3-rute-gerade_maxi-mL_4c.png?v=1769687643"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-t3-3m-lcd-ip65-modbus-rtu-display-kabelverschraubung-1101-3266-4230-000","title":"THERMASGARD® MWTM-Modbus-T3 3m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in a robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254974087499,"sku":"1101-3266-4230-000","price":383.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus-Display__tyr3_maxi-mL_4c.png?v=1769687705"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-modbus-t3-6m-lcd-ip65-modbus-rtu-display-kabelverschraubung-1101-3266-4260-000","title":"THERMASGARD® MWTM-Modbus-T3 6m LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254974284107,"sku":"1101-3266-4260-000","price":425.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-Modbus-Display__tyr3_maxi-mL_4c_b5e65ee0-a96b-4add-bca6-39622836d271.png?v=1769687769"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-0-4m-ip65-w-modbus-kabelverschraubung-1101-326f-0080-000","title":"THERMASGARD® MWTM-wModbus 0.4M","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254974677323,"sku":"1101-326F-0080-000","price":308.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus__tyr3-rute-gerade_maxi-mL_4c.png?v=1769687794"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-3m-ip65-w-modbus-kabelverschraubung-1101-326f-0230-000","title":"THERMASGARD® MWTM-wModbus 3M","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254974808395,"sku":"1101-326F-0230-000","price":366.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus__tyr3_maxi-mL_4c.png?v=1769687821"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-6m-ip65-w-modbus-kabelverschraubung-1101-326f-0260-000","title":"THERMASGARD® MWTM-wModbus 6M","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254974939467,"sku":"1101-326F-0260-000","price":408.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus__tyr3_maxi-mL_4c_e47b4a4d-3f79-4c16-9899-4fd4e2e04aa9.png?v=1769687876"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-0-4m-lcd-ip65-w-modbus-kabelverschraubung-1101-326f-4080-000","title":"THERMASGARD® MWTM-wModbus 0.4M LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254975201611,"sku":"1101-326F-4080-000","price":367.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus-Display__tyr3-rute-gerade_maxi-mL_4c.png?v=1769687808"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-3m-lcd-ip65-w-modbus-kabelverschraubung-1101-326f-4230-000","title":"THERMASGARD® MWTM-wModbus 3M LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254975463755,"sku":"1101-326F-4230-000","price":426.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus-Display__tyr3_maxi-mL_4c.png?v=1769687860"},{"product_id":"mittelwerttemperaturmessumformer-thermasgard-mwtm-wmodbus-6m-lcd-ip65-w-modbus-kabelverschraubung-1101-326f-4260-000","title":"THERMASGARD® MWTM-wModbus 6M LCD","description":"Calibratable mean value temperature measuring transducer THERMASGARD® MWTM - Modbus - T3, with Modbus connection, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (0.4...20 m, fully active) in robust protective tube made of copper with plastic coating, incl. mounting flange, optionally with\/without display, measures temperature (-50...+150 °C). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The rod sensor is used to measure the average temperature (mean value) in gaseous media. It is used in ventilation and air-conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, it measures the temperature evenly). Mounting clamps MK-05-M (accessory) are available for professional installation of the rod.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot matrix range). By means of self-diagnostics, sensor breakage or sensor short circuit are recognized as errors. The error messages can be called up via the Modbus and are shown on the display. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254975627595,"sku":"1101-326F-4260-000","price":468.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTM-wModbus-Display__tyr3_maxi-mL_4c_2e47e0f0-d448-4e22-8ef3-ed3dd10bad78.png?v=1769687915"},{"product_id":"kanal-rauchgas-temperaturmessumformer-thermasgard-rgtm1-i-200mm-4-20ma-druckschraube-1101-3122-0049-810","title":"THERMASGARD® RGTM1-I 200mm","description":"Calibratable flue gas temperature transmitter THERMASGARD® RGTM 1with eight switchable measuring ranges, spring-loaded, replaceable measuring insert and straight protection tube, continuous output and mounting flange.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e For detecting high temperatures in gaseous media, e.g. for exhaust air or flue gas temperature measurement. The sensors are calibrated at the factory. Fine adjustment by the user is possible (span and zero point are adjustable).","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254975856971,"sku":"1101-3122-0049-810","price":318.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FormB-MF_quer_maxi-mL_4c.png?v=1769680731"},{"product_id":"kanal-rauchgas-temperaturmessumformer-thermasgard-rgtm1-i-250mm-4-20ma-druckschraube-1101-3122-0059-810","title":"THERMASGARD® RGTM1-I 250mm","description":"Calibratable flue gas temperature transmitter THERMASGARD® RGTM 1with eight switchable measuring ranges, spring-loaded, replaceable measuring insert and straight protection tube, continuous output and mounting flange.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e For detecting high temperatures in gaseous media, e.g. for exhaust air or flue gas temperature measurement. The sensors are calibrated at the factory. Fine adjustment by the user is possible (span and zero point are adjustable).","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254976053579,"sku":"1101-3122-0059-810","price":330.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FormB-MF_quer_maxi-mL_4c_397a9bb7-c77f-4d70-ac5c-8e950428db05.png?v=1769680865"},{"product_id":"kanal-rauchgas-temperaturmessumformer-thermasgard-rgtm1-i-300mm-4-20ma-druckschraube-1101-3122-0069-810","title":"THERMASGARD® RGTM1-I 300mm","description":"Calibratable flue gas temperature transmitter THERMASGARD® RGTM 1with eight switchable measuring ranges, spring-loaded, replaceable measuring insert and straight protection tube, continuous output and mounting flange.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e For detecting high temperatures in gaseous media, e.g. for exhaust air or flue gas temperature measurement. The sensors are calibrated at the factory. Fine adjustment by the user is possible (span and zero point are adjustable).","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254976512331,"sku":"1101-3122-0069-810","price":334.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FormB-MF_quer_maxi-mL_4c_af06f64f-87d2-4100-b0f7-a29725415e10.png?v=1769680996"},{"product_id":"kanal-rauchgas-temperaturmessumformer-thermasgard-rgtm1-i-400mm-4-20ma-druckschraube-1101-3122-0089-810","title":"THERMASGARD® RGTM1-I 400mm","description":"Calibratable flue gas temperature transmitter THERMASGARD® RGTM 1with eight switchable measuring ranges, spring-loaded, replaceable measuring insert and straight protection tube, continuous output and mounting flange.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e For detecting high temperatures in gaseous media, e.g. for exhaust air or flue gas temperature measurement. The sensors are calibrated at the factory. Fine adjustment by the user is possible (span and zero point are adjustable).","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254976938315,"sku":"1101-3122-0089-810","price":337.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FormB-MF_quer_maxi-mL_4c_c2f75600-25d8-4bb4-bb20-dd8b26782167.png?v=1769681126"},{"product_id":"kanal-rauchgas-temperaturmessumformer-thermasgard-rgtm1-i-200mm-kv-4-20ma-kabelverschraubung-1101-31d2-0049-810","title":"THERMASGARD® RGTM1-I 200mm KV","description":"Calibratable flue gas temperature transmitter THERMASGARD® RGTM 1with eight switchable measuring ranges, spring-loaded, replaceable measuring insert and straight protection tube, continuous output and mounting flange.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e For detecting high temperatures in gaseous media, e.g. for exhaust air or flue gas temperature measurement. The sensors are calibrated at the factory. Fine adjustment by the user is possible (span and zero point are adjustable).","brand":"S+S Regeltechnik","offers":[{"title":"Default Title","offer_id":51254978150731,"sku":"1101-31D2-0049-810","price":328.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FormB-KV-MF__maxi-mL_4c.png?v=1769680771"}],"url":"https:\/\/www.spluss.com\/en-eu\/collections\/duct-temperature-sensor-duct-sensor-immersion-temperature-sensor-active.oembed?page=18","provider":"S+S Regeltechnik","version":"1.0","type":"link"}