Products

°C
Outdoor temperature / humid room temperature transducer

THERMASGARD® ATM2-SD-U

1101-1191-0009-900
– 20...+ 150 °C / – 50... + 50 °C / – 20... + 80 °C / – 30... + 60 °C / 0... + 40 °C / 0... + 50 °C (default) / 0...+ 100 °C / 0...+ 150 °C
typically ± 0.2 K at +25 °C
0 - 10 V
Cable gland
IP54
$109.93
°C
Room temperature sensor with operating elements in the surface switch range

THERMASGARD® FSTF NiTK P

1101-5021-0001-162
passive
–30...+60 °C
2-wire connection
Potentiometer
$110.03
°C
Screw-in sensor - Immersion temperature sensor

THERMASGARD® ETF6 LM235Z 100/80

1101-2072-1021-000
–35...+125 °C
LM235Z
Mounting depth: 100mm
2-wire connection
Output variant: Compression fitting
IP54
$110.36
Stainless steel thermowell

Thermowells TH-MS/VA TH-VA NPT 10+4in

7100-0012-2050-231
10 inch
NPT 1/2"
Neck pipe
Made of stainless steel V4A (1.4571)
max. Pressure: 40 bar
max. Medium temperature: +600 °C
Suitable for: TF 54/ TM 54 (Form B)
$110.63
°C
Duct temperature controller

THERMASREG® KTR-1 U

1102-3010-2100-150
Temperature controller (external setting)

-35 ... +35 °C

Tmin ± 5 K; Tmax ± 3 K

Switching output (contact load):
24...250 V AC +10 %, 10 A, cos ϕ = 1.0
24...250 V AC +10 %, 1.5 A, cos ϕ = 0.6
at 24 V at least 150 mA

Switching differential: 3 K

Insertion lengths:
approx. 205 mm (with flange);
approx. 184 mm (without flange)

Protective sleeve:
metal, material CuZn37 (2.0321),
Ø 14 mm, NL = 205 mm

IP65
$111.33
°C
Screw-in sensor - Immersion temperature sensor

THERMASGARD® ETF6 Pt1000 100/80

1101-2070-5021-000
−35...+180 °C
PT1000
Immersion length: 100 mm
2-wire connection
Output variant: Compression fitting
IP54
$111.34
Mounting plate for powerIO

Power IO mounting plate

3PIO-1403-0000-000
Aluminum mounting plate
for powerIO® box (Series T1)
with cutout for mounting to pipes using cable ties
incl. 4 threaded studs
for subsequent installation of the power IO box
$111.59
°C
Frost protection thermostat

THERMASREG® FST-1D

1102-1021-0102-000
Temperature switches (self-switching)
–10...+15 °C/ +14...+59 °F,
factory setting w = +5 °C (+41 °F)
Switching capacity:
10 (2) A, AC 250 V;
due to the gold-plated contacts also
switching of signal voltages < 24 V
Switching differential: 2 ± 1 K (3,6 ± 1,8 °F)
Capillary tube length: 6.0 m
Sensing response length: approx. 40 cm
Sensor: Copper
Permitted medium: Air
IP65
$111.90
Stainless steel thermowell

Thermowells TH-MS/VA TH-VA NPT 14in

7100-0012-0070-231
14 inch
NPT 1/2"
Made of stainless steel V4A (1.4571)
max. Pressure: 40 bar
max. medium temperature: +600 °C
Suitable for: TF 54/ TM 54 (Form B)
$111.90
°C
Screw-in temperature controller

THERMASREG® ETR-R6585 MS/150

1102-2010-6100-710
Safety temperature limiter
+65 ... +85 °C
Tmin ± 5 K; Tmax ± 3 K
Switching capacity (contact rating):
24...250 V AC +10 %, 10 A, cos ϕ = 1,0
24...250 V AC +10 %, 1,5 A, cos ϕ = 0,6
for 24 V at least 150 mA
Switching differential: +0 / -15...20K
Mounting dimensions: 150 mm
Brass
IP65
$112.65
°C
Screw-in temperature controller

THERMASREG® ETR-R90110 MS/150

1102-2010-6100-810
Safety temperature limiter
+90 ... +110 °C
Tmin ± 5 K; Tmax ± 3 K
Switching capacity (contact rating):
24...250 V AC +10 %, 10 A, cos ϕ = 1.0
24...250 V AC +10 %, 1.5 A, cos ϕ = 0.6
at 24 V at least 150 mA
Switching differential: +0 / -15...20K
Mounting depth: 150 mm
Brass
IP65
$112.65
USB C cable and Rymaskon Stand

$113.00
Distribution box - 2 RS485 subscribers per port (1-4) on powerIO® box, 2x M12 socket

Power IO-Y distributor box

3PIO-1107-0300-000
Distribution box for connecting 2 RS485 participants per port (1-4) on the powerIO® box
Bus and power lines fed through,
plug-in terminal blocks with lever (5x 3-pin / up to 4.00 mm²)
85 x 85 x 51 mm (W x H x D)
2x M12 plug connectors
$113.73
°C
Frost protection thermostat

THERMASREG® FST-3D

1102-1023-0102-000
Temperature controllers (independently switching)
–10...+15 °C/ +14...+59 °F,
factory setting w = +5 °C (+41 °F)
Switching output:
10 (2) A, AC 250 V;
due to the gold-plated contacts, also
switching of signal voltages < 24 V
Switching differential: 2 ± 1 K (3.6 ± 1.8 °F)
Capillary tube length: 1.8 m
Sensing response length: approx. 40 cm
Sensor: Copper
Permissible medium: Air / Water
IP65
$114.19
°C
Screw-in sensor - Immersion temperature sensor

THERMASGARD® ETF6 Pt100 150/80

1101-2070-1033-000
−35...+180 °C
PT100
Insertion length: 150 mm
4-wire connection
Output variant: clamping screw
IP54
$114.44
Weld-in protective sleeve

Thermowells ESSH ESSH 200MM

7100-0052-0040-001
200 mm
G1/2"
Stainless steel V4A (1.4571)
max. Pressure: 100 bar
$114.60

We also manufacture individually

Do you have special requirements? As a manufacturer with our own production facilities in Germany, we are also able to produce products outside of the standard range at any time.

Secure payment methods

Do you have a question? We are at your disposal:

+49 911 519 470

Mo. - Fr. 7.00am - 5.00pm CEST

e-mail FAQ

We also manufacture individually

Secure payment methods

Do you have a question? We are at your disposal:

Saved products

Select variant:

Saved products