MFT-20-K
Regular price
$11.92
Regular price
Sale price
$11.92
°C + % RH
Product description
- 0...100% RH
- 0...+50 / –20...+50 / –20...+80 / 0...+100 °C / +32...+212 °F
- Temperature [°C], relative humidity [% RH], absolute humidity [g / m3], dew point [°C], mixing ratio [g / kg], wet bulb temperature [°C]
- up to three parameters in the display
- 3 active outputs (0 - 10 V or 4...20 mA) 1 changeover contact (potential-free, 48 V, 0.1 A, switching hysteresis: 2% of the selected scaling)
- IP 65 (according to EN 60 529) >> Housing AND sensors <<
Duct sensor HYGRASREG® KFTF-45 with sealed sensor technology (IP 65), with active and switching output, impact-resistant plastic housing with quick-locking screws, cable gland, plastic sintered filter, optionally with/without display, for recording relative humidity (0...100 % RH) and temperature (4 switchable measuring ranges, max. 0...+100 °C) as well as for determining various humidity measurement technology parameters. The measuring transducer converts the measured variables into a standard signal of 0 - 10 V or 4...20 mA.
The device is specially designed for use in harsh environmental conditions (95...99 % RH). A long-term stable, digital humidity and temperature sensor with high impermeability (IP 65 encapsulated) is used. The following parameters are calculated internally from these measured variables and can be called up via the OUT3 output: absolute humidity, mixing ratio, dew point and wet bulb temperature (switchable via DIP switch). With device variant KFTF-45 LCD, up to three parameters can be shown on the display (adjustable via DIP switch).
The sensor is used in medical technology, refrigeration technology, control technology, air conditioning and clean room technology. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.
The device is specially designed for use in harsh environmental conditions (95...99 % RH). A long-term stable, digital humidity and temperature sensor with high impermeability (IP 65 encapsulated) is used. The following parameters are calculated internally from these measured variables and can be called up via the OUT3 output: absolute humidity, mixing ratio, dew point and wet bulb temperature (switchable via DIP switch). With device variant KFTF-45 LCD, up to three parameters can be shown on the display (adjustable via DIP switch).
The sensor is used in medical technology, refrigeration technology, control technology, air conditioning and clean room technology. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.
The new LS-Flex: Detect leaks in pipes more qui...
Early detection of water leaks is now not just an option, but a necessity. With...
The new LS-Flex: Detect leaks in pipes more qui...
Early detection of water leaks is now not just an option, but a necessity. With the LS-Flex we of...
High humidity under control – with these specia...
Perfect performance – our special solutions for extreme humidity Where other humidity sensors have long...
High humidity under control – with these specia...
Perfect performance – our special solutions for extreme humidity Where other humidity sensors hav...
Duct humidity sensors in focus: Precise, reliab...
in measurement and control technology, precision and reliability are crucial - especially when it comes...
Duct humidity sensors in focus: Precise, reliab...
in measurement and control technology, precision and reliability are crucial - especially when it...
Focus on duct sensors - how to increase energy ...
In modern HVAC systems, the precise detection of humidity and temperature in the ventilation duct...
Focus on duct sensors - how to increase energy ...
In modern HVAC systems, the precise detection of humidity and temperature in the ventilation duct...
Pressure in the system? How to keep temperature...
Made for extreme conditions - HYGRASGARD® humidity and temperature sensors - specially developed for use...
Pressure in the system? How to keep temperature...
Made for extreme conditions - HYGRASGARD® humidity and temperature sensors - specially developed ...
Briefly explained: Rymaskon® - Interface vs. Co...
For modern building automation, we offer you a variety of room operating devices that can...
Briefly explained: Rymaskon® - Interface vs. Co...
For modern building automation, we offer you a variety of room operating devices that can optimiz...
With a controller from the RYMASKON® series, you have a digital room controller that can...
With a controller from the RYMASKON® series, you have a digital room controller that can do more ...
Whether in ventilation ducts or directly on the ventilation unit - the KMW-F 450MM bracket...
Whether in ventilation ducts or directly on the ventilation unit - the KMW-F 450MM bracket offers...
W-Modbus - the revolution in building automation!
W-Modbus is a wireless solution for building automation that is characterized by simple installation, long...
W-Modbus - the revolution in building automation!
W-Modbus is a wireless solution for building automation that is characterized by simple installat...
We also manufacture individually
Do you have special requirements?As a manufacturer with our own production facilities in Germany, we are always in a position to produce products outside the standard range.
Contact us
Secure payment methods
Do you have a question? We are at your disposal:
+49 911 519 470
Mo. - Fr. 7.00am - 5.00pm CEST